Suction Strainers Type SUS

Suction filter for tank installation as the first link in the hydraulic filtration circuit and as a protective filter for hydraulic pumps. Installation in hydraulic tanks for direct connection to the intake line using female thread BSP or NPT. Upper end cap made of plastic/polyamide or aluminum. Lower end cap made of steel, galvanized. Standard filter material: stainless steel wire mesh (125 μm); alternative grades available. The position in the tank should always be below the minimum liquid level. For mobile and stationary hydraulics.

Filters / Sorting

STAUFF Series

Group Size

Micron Rating

Bypass Option

Categories

42 Results
STAUFF Material Description
STAUFF Material No.
SUS-040-G06-075-125-P-O
1910000995
STAUFF Material Description
STAUFF Material No.
SUS-040-G06-075-125-P-O
1910000995
STAUFF Material Description
STAUFF Material No.
SUS-050-G06-067-125-P-O
1910000637
STAUFF Material Description
STAUFF Material No.
SUS-050-G06-067-125-P-O
1910000637
STAUFF Material Description
STAUFF Material No.
SUS-050-N06-090-125-P-O
1910002409
STAUFF Material Description
STAUFF Material No.
SUS-050-N06-090-125-P-O
1910002409
STAUFF Material Description
STAUFF Material No.
SUS-050-N08-105-125-A-O
1910001903
STAUFF Material Description
STAUFF Material No.
SUS-050-N08-105-125-A-O
1910001903
STAUFF Material Description
STAUFF Material No.
SUS-050-N08-105-125-P-O
1910001904
STAUFF Material Description
STAUFF Material No.
SUS-050-N08-105-125-P-O
1910001904
STAUFF Material Description
STAUFF Material No.
SUS-068-G12-105-125-P-O
1910000648
STAUFF Material Description
STAUFF Material No.
SUS-068-G16-140-125-P-O
1910000649
STAUFF Material Description
STAUFF Material No.
SUS-068-N12-105-125-A-B0.2
1910001922
STAUFF Material Description
STAUFF Material No.
SUS-068-N12-105-125-A-B0.2
1910001922
STAUFF Material Description
STAUFF Material No.
SUS-068-N12-105-125-A-O
1910001905
STAUFF Material Description
STAUFF Material No.
SUS-068-N12-105-125-A-O
1910001905
STAUFF Material Description
STAUFF Material No.
SUS-068-N16-140-125-A-B0.2
1910001924
STAUFF Material Description
STAUFF Material No.
SUS-068-N16-140-125-A-B0.2
1910001924
STAUFF Material Description
STAUFF Material No.
SUS-068-N16-140-125-A-O
1910001907
STAUFF Material Description
STAUFF Material No.
SUS-068-N16-140-125-P-O
1910001908
STAUFF Material Description
STAUFF Material No.
SUS-068-N16-140-125-P-O
1910001908

If you have a regular demand for pipework equipment or hydraulic components and you are interested in individual pricing for our product range, please contact STAUFF.



⚠️California Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or reproductive harm. For more information, please visit www.P65Warnings.ca.gov .

STAUFF Online Page-Flip Catalog

Navigate and search content, forward via email, print and download in PDF format

STAUFF Online Page-Flip Catalog
Navigate and search content, forward via email, print, and download in PDF format

STAUFF Product Catalog

Download entire STAUFF product catalog in PDF format

First element in the hydraulic filtration circuit

Suction filters of type SUS from STAUFF are typically used in mobile hydraulics and stationary hydraulics. They have been developed for direct installation in hydraulic tanks and other reservoirs. The standard versions are suitable for use with mineral oil-based and petroleum-based hydraulic fluids (HL and HLP). Alternative versions for other media are available on request. 

Depending on the selected size, STAUFF suction filters are suitable for a maximum flow rate of up to 400 litres per minute. 

The position of the filter in the hydraulic tank should always be below the minimum liquid level. As the first element in the hydraulic filtration circuit, they are usually connected to the intake line and therefore serve as a protection filter for hydraulic pumps.  

STAUFF suction filters are usually connected to the line using a BSP female thread (as per ISO 228) or NPT female thread (as per ANSI B1.20.1). 

The upper end cap with a connecting thread is made of either aluminium or fibreglass-reinforced polyamide (PA). The lower end cap is made of galvanised steel.  

The standard filter material is stainless steel mesh with a filter grade of 125 micrometres. Alternative grades between 60 and 250 micrometres are also available on request. 

Optionally integrated bypass valves with an opening pressure of 0.2 bar reduce the risk of high pressure fluctuations, which can be caused by strongly contaminated suction strainers or highly viscous media. 

Purchase STAUFF Articles Online

Commercial customers and users can use the STAUFF manufacturer shop to purchase and order the products in this category online – quickly, easily, safely, and inexpensively.

STAUFF provides direct access to a comprehensive range of products with more than 50,000 individual standard hydraulic components in 10 product groups for mechanical and plant engineering and for industrial service and maintenance. In addition, STAUFF is also able offer individually designed system and special solutions according to customer's requirements.

Original STAUFF products are available from stock directly from the manufacturer.

EditMenuCloseResetCheckSpinnerFiltersCart